Bosch appliance repair

Do-it-yourself Bosch appliance repair.

The company’s engineers are tirelessly working on innovations in the technical field, improving the appearance and design of models. It was in the Slovenian company that they first deviated from traditions and changed the color of the electrical appliance from traditional white to silver. However, all refrigerators have their own durability resource, after which the product will need Bosch appliance repair. In some cases, failure is due to the natural process of elements’ MTBF; in other situations, this is accompanied by external factors. Often the owner himself violates the rules for operating an electrical appliance or it is affected by changes in the mains voltage.
In any case, do-it-yourself Bosch appliance repair is classified into three levels: light, medium and major (recovery), which involves the replacement of large components. The troubleshooting process begins with competent diagnostics, which leads step by step to a failed node or element.
By analyzing faults of an electrical nature, we can conclude that most often, when Bosch appliance repair with your own hands, you have to change the motor-compressor, the electronic control module or the sensors installed inside the chambers.
However, not in all situations, the restoration of the refrigerator’s performance is associated with such serious malfunctions and, as a result, high costs.
A commonplace situation is the failure of the system, in which the motor-compressor is not even turned on. As a result, there is no movement in the refrigerant circuit and no cooling process takes place. There may be a number of reasons for this. At low mains voltage, modern electronics turn on protection and do not connect the compressor, in order to avoid its failure during start-up. Therefore, you immediately need to make sure that there is voltage and its proper level. As a rule, all devices operate normally with a supply voltage range of 200 to 240V. A relay is responsible for turning on the compressor, while another contactor is installed to protect the motor thermally. Both switches are easy to check for the resistance of the armature winding and for contact closure according to the wiring diagram.
Often, situations that cause Bosch appliance repair work are the appearance of water under the refrigerator or ice inside the chambers. Do-it-yourself qualified Bosch appliance repair should be focused on checking the drainage tubes through which moisture is removed. The blockage causes the water to not reach its final destination, which is the sump above the compressor and spill onto the floor. Replacing tubes is an easy process, even for an inexperienced craftsman. But the refrigerator can freeze due to freon entering the chambers through microcracks in the system. They should be identified and soldered.
The noise during the operation of a new electrical appliance is probably due to the fact that you need to re-level the refrigerator. And after replacing the compressor, increased decibels clearly indicate that the motor is not installed correctly and is in the wrong position. In devices with the No Frost system, the fan may be noisy, requiring opening and lubrication.
The quality of the Bosch appliance repair can be judged, not only by the process itself or the initial result. Accepting original components for installation, in the absence of forcing external factors, we can talk about a guarantee for the unit from the manufacturer’s factory. Surely, such a Bosch appliance repair will extend the life, without forcing you to remember the malfunction for many years.